No Room for an Overhead Crane?

Gorbel’s Freestanding and Wall Mounted Work Station Jib Cranes are a practical and economic solution! With a wide variety of spans, capacities and mounting styles, you will be able to find an efficient and reliable solution for your material handling application(s).

Types of Workstation Jib Cranes:

Freestanding (WSJ360)

Capacities: 100, 150, 250, 500 and 1,000 Lbs.

Rotates 360 degrees and can be bolted directly to your existing floor without the need for a base.

These cranes have a retaining pin through the pivot pin to help against accidental dislodgment of the boom assembly.

This model is also available in stainless steel for models with 250 or 500 series track.

Wall Cantilever (WSJ200)

Capacities: 100, 150, 250, 500 and 1,000 Lbs.

Rotates 200 degrees and mounts to a wall or column. The crane uses a tapered roller bearing at the pivot point for ease of rotation. Shim stock is included with each jib to ensure that it is aligned through the pivot axis.

This model is also available in stainless steel for models with 250 or 500 series track.

Wall Bracket (AL100)

Capacities: 150, 250, 500, 1,000 and 2,000 Lbs.

Rotates 200 degrees and handles extremely easy due to its patented lightweight aluminum enclosed track. The jib rotates 40% easier than a comparable I-beam jib.

Standard hoist trolley and end stops are included in the base price.

Do you still need help assessing your best option?  Call one of our Sales Representative at 800-242-3477 for a free crane assessment or email us at smartlift@wiscolift.com.

#materialhandling  #workstationjibcranes  #jibcranes

Do You Need to Improve Work Force Utilization?

Just imagine this scenario. You are working on a project and your work cell members typically operate a manual I-beam crane. But, the two work cell members who are required to handle a large load are out sick.

I-beam cranes require more effort to move which means there is a greater chance of injury. An ergonomic solution is Gorbel’s Freestanding Work Station Bridge Crane. A Gorbel Workstation Bridge Crane require much less effort, a load can be moved 3 times more easily than with a traditional I-beam crane. Because it is so easy to handle, it can be safely operated with fewer work cell members also allowing a greater variety of people to safely lift and maneuver heavy loads.

Features:

·        Capacities from 150 to 4000 lbs

·        Rectangular coverage with up to 34’ bridge and 124’ runway standard

·        Standard support distances of 20, 25, and 30 feet.

·        Easy to move and position loads

·        Modular design for greater flexibility

·        Doesn't require existing support structure

View the VIDEO at: https://vimeo.com/85185030

For more information on Gorbel’s Freestanding Work Station Crane, please call our Sales Representative at 800-242-3477 or email us at smartlift@wiscolift.com.

Inspection Tips for Below-The-Hook Lifting Devices

When was the last time you inspected your below-the-hook lifting devices? A below-the-hook lifting device is defined as a device that is used for attaching loads to a hoist. It may contain components such as slings, hooks, rigging hardware and lifting attachments. Types of below-the-hook lifting devices include:

• Lift Beams/Spreader Beams
• Plate Clamps
• Pallet Lifters
• Coil Lifters
• Vacuum Lifters
• Lifting Magnets
• Sheet Lifters
• Tongs

According to ASME B30.20, these are the minimum inspection requirements:

VISUAL INSPECTION: Daily / Weekly / Monthly

• Check for structural deformation, cracks and excessive wear of any part of the lift device.
• Check for loose or missing guards, fasteners, covers, stops or nameplates.
• Check all functional operating mechanisms and automatic hold and release mechanisms for maladjustments interfering with operation.

RECORDED INSPECTION: Quarterly / Semiannually / Annually

• Check for loose bolts or fasteners.
• Check for cracked or worn gears, pulleys, sheaves, sprockets, bearings, chains or belts.
• Check for excessive wear of linkages and other mechanical parts.
• Check for excessive wear at hoist hooking points and load support clevises or pins.

Any visual or recorded problem should render the device out of service. ASME B30.20-1.3.9 Maintenance states:

(b)(1) Before adjustments and repairs are started on a lifter, the following precautions shall be taken:(a) All sources of power shall be disconnected, locked out, and tagged “Out of Service.”(b) A lifter removed from service for repair shall be tagged “Out of Service”.

Do you need an ongoing Inspection/Maintenance Program for your equipment?  If so, please call our Sales Representative at 800-242-3477 or email us at smartlift@wiscolift.com. We would be happy to design a program tailored to your company’s specific needs.

#liftingdeviceinspection #hoistinspection #materialhandling