Fall Arrest System Solutions

To fully comply with OSHA standards and ANSI recommendations, employees must provide their employees a workplace free from health hazards and known safety risks. When working OVER dangerous equipment and machinery, a Fall Arrest System must be in place, regardless of the height.

Gorbel has two fall arrest systems that work well in elevated environments.

Tether Track System (Rigid)

The Tether Track System is the best option for low-headroom applications. It stops fall within a shorter distance than wire rope and less clearance is required from the anchor point to the floor below.

• Designed for multiple workers
•  Includes an anchor trolley
•  Various in various configurations, including multiple track profiles and support center distances
• Provides a high degree of mobility and freedom

View VIDEO of the Tether Track in Action >>

Ranger Mobile Anchor (Flexible)

The new Ranger allows for quick attachment to a forklift truck or alternate towing vehicles. It allows the unit to be anchored directly above where the user is performing the work, working well for indoor or outdoor use.

• All steel construction
• Only 2,685 lbs.
•  Adjustable anchor height at 18’, 20’ and 22’
•  Integral outriggers provide firm support
• Permits a 30 degree work area from anchor point
• Maximum tow speed 25 mph

View VIDEO of the Ranger Mobile in Action >>

For more information on these Gorbel products or assistance in determining what Fall Arrest System is best for your application, please call our Sales Representative at 800-242-3477 or email us at smartlift@wiscolift.com.

No Room for an Overhead Crane?

Gorbel’s Freestanding and Wall Mounted Work Station Jib Cranes are a practical and economic solution! With a wide variety of spans, capacities and mounting styles, you will be able to find an efficient and reliable solution for your material handling application(s).

Types of Workstation Jib Cranes:

Freestanding (WSJ360)

Capacities: 100, 150, 250, 500 and 1,000 Lbs.

Rotates 360 degrees and can be bolted directly to your existing floor without the need for a base.

These cranes have a retaining pin through the pivot pin to help against accidental dislodgment of the boom assembly.

This model is also available in stainless steel for models with 250 or 500 series track.

Wall Cantilever (WSJ200)

Capacities: 100, 150, 250, 500 and 1,000 Lbs.

Rotates 200 degrees and mounts to a wall or column. The crane uses a tapered roller bearing at the pivot point for ease of rotation. Shim stock is included with each jib to ensure that it is aligned through the pivot axis.

This model is also available in stainless steel for models with 250 or 500 series track.

Wall Bracket (AL100)

Capacities: 150, 250, 500, 1,000 and 2,000 Lbs.

Rotates 200 degrees and handles extremely easy due to its patented lightweight aluminum enclosed track. The jib rotates 40% easier than a comparable I-beam jib.

Standard hoist trolley and end stops are included in the base price.

Do you still need help assessing your best option?  Call one of our Sales Representative at 800-242-3477 for a free crane assessment or email us at smartlift@wiscolift.com.

#materialhandling  #workstationjibcranes  #jibcranes

Do You Need to Improve Work Force Utilization?

Just imagine this scenario. You are working on a project and your work cell members typically operate a manual I-beam crane. But, the two work cell members who are required to handle a large load are out sick.

I-beam cranes require more effort to move which means there is a greater chance of injury. An ergonomic solution is Gorbel’s Freestanding Work Station Bridge Crane. A Gorbel Workstation Bridge Crane require much less effort, a load can be moved 3 times more easily than with a traditional I-beam crane. Because it is so easy to handle, it can be safely operated with fewer work cell members also allowing a greater variety of people to safely lift and maneuver heavy loads.

Features:

·        Capacities from 150 to 4000 lbs

·        Rectangular coverage with up to 34’ bridge and 124’ runway standard

·        Standard support distances of 20, 25, and 30 feet.

·        Easy to move and position loads

·        Modular design for greater flexibility

·        Doesn't require existing support structure

View the VIDEO at: https://vimeo.com/85185030

For more information on Gorbel’s Freestanding Work Station Crane, please call our Sales Representative at 800-242-3477 or email us at smartlift@wiscolift.com.

Inspection Tips for Below-The-Hook Lifting Devices

When was the last time you inspected your below-the-hook lifting devices? A below-the-hook lifting device is defined as a device that is used for attaching loads to a hoist. It may contain components such as slings, hooks, rigging hardware and lifting attachments. Types of below-the-hook lifting devices include:

• Lift Beams/Spreader Beams
• Plate Clamps
• Pallet Lifters
• Coil Lifters
• Vacuum Lifters
• Lifting Magnets
• Sheet Lifters
• Tongs

According to ASME B30.20, these are the minimum inspection requirements:

VISUAL INSPECTION: Daily / Weekly / Monthly

• Check for structural deformation, cracks and excessive wear of any part of the lift device.
• Check for loose or missing guards, fasteners, covers, stops or nameplates.
• Check all functional operating mechanisms and automatic hold and release mechanisms for maladjustments interfering with operation.

RECORDED INSPECTION: Quarterly / Semiannually / Annually

• Check for loose bolts or fasteners.
• Check for cracked or worn gears, pulleys, sheaves, sprockets, bearings, chains or belts.
• Check for excessive wear of linkages and other mechanical parts.
• Check for excessive wear at hoist hooking points and load support clevises or pins.

Any visual or recorded problem should render the device out of service. ASME B30.20-1.3.9 Maintenance states:

(b)(1) Before adjustments and repairs are started on a lifter, the following precautions shall be taken:(a) All sources of power shall be disconnected, locked out, and tagged “Out of Service.”(b) A lifter removed from service for repair shall be tagged “Out of Service”.

Do you need an ongoing Inspection/Maintenance Program for your equipment?  If so, please call our Sales Representative at 800-242-3477 or email us at smartlift@wiscolift.com. We would be happy to design a program tailored to your company’s specific needs.

#liftingdeviceinspection #hoistinspection #materialhandling

Is Your Fall Arrest System Safe?

Did you know that OSHA requires a visual inspection of all fall arrest equipment prior to each use?

To maintain high performance of your equipment, all fall arrest equipment, harnesses, lanyards, and its hardware should be routinely inspected by a “trained and competent” person. Over time, belts, rings, lanyards and webbing can become frayed or distorted which could cause an arrest system to fail.

Before using any equipment, the following should be examined:

Harnesses – Hold one side toward you and invert the harness in a “V” shape. Look for any broken fibers, cuts, or frayed edges.

Rings/Buckles – Check for any distortion, cracks, or rough edges.

Lanyards – Check the hardware for any distortion, cracks, pitted surfaces or corrosion. Thimbles should be firmly seated in the eye of the splice, and there should be no loose or cut strands. Inspect the lanyard by rotating it and check for any cuts, breaks or discoloration.

For OSHA’s comprehensive inspection list, go to: 

https://www.osha.gov/Region7/fallprotection/fall_protection_info.html

Need an ongoing Inspection/Maintenance Program for your equipment?
Email us at smartlift@wiscolift.com or call our Sales Representative at 800-242-3477 and we would be happy to design a program tailored to your company’s needs.

Lift Transmissions Safely and Easily with the T/D Lift

WiscoLift is proud to introduce their new product, T/D Lift. 

The T/D Lift, used with your hoist, will help you to safely and efficiently raise, turn, rotate and lower transmissions and differentials.  Simply engage the T/D Lift until the thread covers the sight hole, then lift! Standard and metric threads available.

Features:

• Rated for 1000 lbs.
• Engraved with work load limit and serial number.
• Sight-hole to visually verify thread is fully engaged.
• Includes swivel hoist ring.
• Each T/D Lift is load tested to 1250 lbs. and comes with a test certificate.

For additional information and pricing, go to: T/D Lift. You may also email us at smartlift@wiscolift.com, or call us at 800-242-3477.

#transmissions  #differentials  #liftingdevices  #materialhandling

Assembly Line Solutions

Assembly lines have come a long way since the days of "I Love Lucy." There are many products that improve work efficiency, including the use of spring balancers.

The advantage of using ENDO spring balancers on your assembly line are that they support heavy tools with cable tension equal to the weight of the suspended tools which makes them seem virtually “weightless”.  As the tool is repositioned, the balancer extends or retracts the support cable to follow the tool’s movements. Constant tension on the cable is accomplished with a spring motor and a tapered drum. The assembler has the flexibility to reposition the tool, while experiencing comfortable operation and less fatigue.

There are many types of spring balancers on the market including Long Stroke Balancers, designed for high ceiling applications, “ECO” Balancers, designed for the food industry, Clean Room Balancers, for use in industries of pharmaceuticals and electronics where there are environmentally sensitive components, Air Tool Balancers, and “Zero Gravity” Balancers.

Load capacity guidelines for using spring balancers are to use the size that is comparable to the upper end of the capacity range. For example, if lifting a total weight of 10.5 lbs, use a balancer that has capacities up to 11 lbs. versus one that has capacities of up to 19.8 lbs.

The solutions we deliver for your applications are based on your specific requirements. You can count on WiscoLift to find the perfect solution to meet your jobsite requirements. For more information, call our Sales Representative at 800-242-3477.

#OEM #SpringBalancing  #ENDOSpringBalancers  #assemblyline